1.4.6
The minimum design assumptions per single-family residential subdivision lot shall be stated on the face of the SDAP plans and on the face of the final plat, in a format similar to the following:
|
Lot No. |
Minimum Design Allotment of Hard Surface Area in Square Feet Examples |
Minimum Design Allotment of Developed Pervious Surface |
Surplus Total Available for Individual Lot Design |
|
|---|---|---|---|---|
|
Lot 1 |
|
|
|
|
|
Lot 2 |
|
|
|
|
|
Lot 3 |
|
|
|
|
|
Lot 4 |
|
|
|
|
|
Lot 5 |
|
|
|
|
|
Cumulative Totals |
|
|
|
|
If surplus stormwater mitigation is provided for the subdivision to allow flexibility in individual lot design, that surplus availability shall be stated in square feet on the face of the final construction drawings and final plat. Usage of the surplus area by individual lot development may be considered when the design does not cause noncompliance with any conditions of subdivision approval or other applicable regulations.
In addition, for individual lot development where hard surfaces are directed to more than one stormwater BMP, a breakdown of the various surface areas (e.g., roof, driveway, etc.) shall be included in the chart on the face of the final plat.