Chapter 17.365
BUSINESS CENTER ZONE (BC)

Sections:

17.365.010    Purpose.

17.365.020    Uses.

17.365.030    Height regulations.

17.365.040    Site requirements.

17.365.050    Signs.

17.365.060    Off-street parking and loading.

17.365.070    Site landscaping and design plan.

17.365.080    Performance standards.

17.365.090    Administration.

17.365.010 Purpose.

This zone is intended to provide for integrated grouping of medium to large size businesses within an attractive park-like setting. The Business Center (BC) Zone allows flexibility in the amount of space within each business dedicated to office use, warehousing, and/or light manufacturing operations. Permitted businesses are intended to support the creation, development and retention of primary wage employment in the professional and technical fields, and not intended for the general retail commercial needs of the area.

(Ord. 415 (2008) § 125, 2008: Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.020 Uses.

Uses shall be allowed in accordance with Chapter 17.381 and Table 17.381.040(C), Airport and Industrial Zones use table.

(Ord. 415 (2008) § 126, 2008: Ord. 384 (2007) § 6, 2007: Ord. 367 (2006) § 83, 2006: Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.030 Height regulation.

Height requirements shall be in accordance with Chapter 17.382 and Table 17.382.080, Industrial Density and Dimensions Table.

(Ord. 367 (2006) § 85, 2006: Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.040 Site requirements.

A.    Site requirements shall be in accordance with Chapter 17.382 and Table 17.382.080, Industrial Density and Dimensions Table.

B.    Fences. Fences, walls and hedges will be allowed inside of a boundary planting screen where it is necessary to protect property of the industry or business concerned; or to protect the public from a dangerous condition. Fences may not be located in or adjacent to a required yard adjacent to a public right-of-way.

(Ord. 367 (2006) § 86, 2006: Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.050 Signs.

Signs shall be permitted according to the provisions of Chapter 17.446, providing that signs also conform to design standards associated with this zone and/or design standards associated with a particular sub-area.

(Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.060 Off-street parking and loading.

Off-street parking and loading shall be provided as required by Chapter 17.435 of this code.

(Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.070 Site landscaping and design plan.

As a component of permit and/or land use review, development within this zone shall be subject to review and approval by the director of a site landscape and design plan based on conformance with Chapter 17.385, any design standards associated with this zone and/or design standards associated with a particular sub-area, whichever is most restrictive. In addition to these requirements, the following shall apply:

A.    All required landscaping shall be installed prior to occupancy.

B.    Required rear and side yard setback areas abutting a residential zone shall provide and maintain a dense evergreen screening buffer which attains a mature height of at least eleven feet, or other screening measure as approved by the director.

C.    Required setback areas adjacent to streets and those abutting a residential zone shall be continuously maintained in plantings, with such live ground cover and trees or shrubs established and maintained in a manner providing a park-like character to the property.

D.    Areas which are to be maintained in their natural setting shall be so designated on a landscape plan, and subject to the review and approval of the director.

E.    All mechanical, heating, and ventilating equipment shall be visually screened whether on grade or building mounted.

(Ord. 415 (2008) § 127, 2008: Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.080 Performance standards.

No land or structure shall be used or occupied within this zone unless there is compliance with the following minimum performance standards:

A.    Maximum permissible noise levels shall be in compliance with the Kitsap County Noise Ordinance.

B.    Vibration, other than that caused by highway vehicles, trains, and aircraft which is discernible without instruments at the property line of the use concerned is prohibited.

C.    Smoke and Particulate Matter. Air emissions must meet standards approved by the Puget Sound Air Pollution Control Authority.

D.    Odors. The emission of noxious gases or matter in such quantities as to be readily detectable at any point beyond the property line of the use causing such odors is prohibited.

E.    Heat and Glare. Except for exterior lighting, operations producing heat and glare shall be conducted within an enclosed building. Exterior lighting shall be designed to shield surrounding streets and land uses from nuisance and glare.

(Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)

17.365.090 Administration.

A.    As a condition for the granting of a building permit and/or site plan approval, at the request of the director, information sufficient to determine the degree of compliance with the standards in this title, shall be furnished by the applicant. Such request may include continuous records of operation, for periodic checks to assure maintenance of standards or for special surveys. Maximum permissible noise levels shall be in compliance with the Kitsap County Noise Ordinance.

(Ord. 367 (2006) § 87, 2006: Ord. 311 (2003) [Attachment 5 [§ 4 (part)]], 2003)